Volkswagen Golf Service & Repair Manual: Safety precautions when working in the vicinity of high-voltage components
| Danger to life due to high voltage |
| The high-voltage system is under high voltage. If high-voltage components are damaged, there is a risk of severe or fatal injury due to electric shock. |
| – | Perform visual check of high-voltage components and high-voltage cables. |
| – | Never use cutting or forming tools, or any other sharp-edged tools. |
| – | Never use heat sources such as welding, brazing, soldering, hot air or thermal bonding equipment. |
Safety precautions when working on high-voltage system
Danger to life due to high voltage
The high-voltage system is under high voltage. There is a risk of
severe or fatal injury due to electric shock.
–
Pe ...
Safety precautions when working on the cooling system
Risk of scalding by hot coolant
When the engine is warm, the cooling system is under pressure.
Danger of scalding due to steam and hot coolant.
–
Alway ...
Other materials:
Winter tyres
First read and observe the introductory information
and safety warnings In winter road conditions, winter tyres will considerably
improve the car's handling. The design of summer tyres (width, rubber compound,
tread pattern) gives less grip on ice and snow. Volkswagen urgently recommends ...
Removing and installing drive shaft, right drive shaft, constant velocity
joints VL100 and VL107, e-Golf
Special tools and workshop equipment
required
Torque wrench -V.A.G 1332-
Press tool -T10520-
...
Removing and installing bracket for onboard supply control unit -J519-, LHD
vehicles
Removing
–
With ignition switched off, disconnect earth cable from
battery
→ Chapter.
–
Remove dash panel
→ General body repairs, interior; Rep. gr.70.
...
