Volkswagen Golf Service & Repair Manual: Safety precautions when using testers and measuring instruments during a
road test
| Risk of injury through insecure testing and measuring instruments |
| When the front passenger airbag is triggered in an accident,
insufficiently secured testing and measuring instruments become
dangerous projectiles. |
| – |
Secure testing and measuring instruments on the rear seat. |
| – |
a second person must operate the testing and measuring instruments
on the rear seat. |
Risk of scalding by hot coolant
When the engine is warm, the cooling system is under pressure.
Danger of scalding due to steam and hot coolant.
–
Alway ...
Danger to life due to high voltage
The high-voltage system is under high voltage. There is a risk of
severe or fatal injury due to electric shock.
–
Pe ...
Other materials:
Removing and installing reversing light bulb
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
Removing
–
Turn light switch to “0” position.
...
Removing and installing illuminated vanity mirror -W20-/-W14-
Note
If an LED vanity mirror light is faulty, the entire light
must be renewed.
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same w ...
Checking pistons and cylinder bores
Checking piston
–
Using a micrometre, measure approx. 10 mm from the lower
edge, perpendicular to the piston pin axis.
Maximum deviation from nominal dimension: 0.04 mm
...
© 2016-2024 Copyright www.vwgolf.org
Safety precautions when working on the cooling system
Safety precautions when working on high-voltage system