Volkswagen Golf Service & Repair Manual: Safety instructions for using extraction and charging equipment
Before connecting the charging system to the air
conditioning system, make sure that all existing shut-off valves
are closed. |
Before the charging equipment is decoupled from the air
conditioning system, ensure that the process has finished. The
reason for this is to ensure that no refrigerant oil escapes
into the atmosphere. |
After the cleaned refrigerant from the charging system has
been charged into an external pressurised gas cylinder, close
the hand shut-off valves on the bottle and the charging system. |
Do not expose charging system to moisture or use it in a wet
environment. |
Before performing service work and the charging system,
disconnect the current supply. |
To reduce danger of fire, avoid using extension cords. If
nevertheless it is necessary to use an extension cable, use an
extension cable with a cross-section of at least 2.5 mm2.
|
In case of fire, remove external cylinder. |
If entrained oil from the air conditioning system suction
accumulator is trapped in the measuring beaker supplied, be sure
subsequently to pour the oil into a container that can be
sealed, since the oil contains a small amount of refrigerant.
Refrigerants must not be released into the environment. |
When the air conditioner service station is switched off, it
must be secured against rolling away. |
|
|
|
Secure vessels against falling over!
Secure standing cylinders against falling over and lying
cylinders from rolling away.
...
Air conditioning service station -VAS 6007A- (and further
service stations currently available)
→ Workshop equipment
...
Other materials:
Removing and installing relay and fuse carrier behind dash panel, LHD
vehicles
Removing
–
With ignition switched off, disconnect earth cable from
battery
→ Chapter.
–
Remove dash panel
→ General body repairs, interior; Rep. gr.70.
...
General notes on tyre noise
Tyre noise that can be heard by the human ear is caused by
vibrations which are transmitted by the air from the source of
the sound to our ears.
Of interest here are the noises caused by certain
characteristics and effects while the tyre ...
Removing and installing window slot outer seal
Removing
Note
The core of the window slot outer seal is a metal insert.
If it is bent or distorted, the window slot outer seal
cannot be straightened out anymore. It will remain “wavy ...
© 2016-2024 Copyright www.vwgolf.org