|
Assembly overview - intake manifold
1 -
Coolant pipe
Clipped onto intake manifold.
Removing and installing coolant pipe
→ Chapter
2 -
Intake manifold
Combined in one unit with charge air cooler
Remov ...
Removing and installing air distribution flap control motor -V428-, RHD
vehicles
Special tools and workshop equipment
required
Vehicle diagnostic tester
First carry out the following work:
–
Switch off all electrical consumers.
–
...
Assembly overview - steering rack, left-hand drive
Caution
The following work must not be performed while the universal
joint is separated from the steering rack:
Connect battery.
Switch on ignition.
Turn steering rack.
...