Volkswagen Golf Service & Repair Manual: Repairing rain and light sensor, Valeo
| Remove rain and light sensor -G397-
→ Chapter. |
|
|
|
| – |
Carefully remove sensor foil -2-
or any sensor foil residues from rain and light sensor -G397--1-. |
Caution
| The surfaces of the sensor must be completely free
of remnants of foil. |
|
| – |
Clean sensor surfaces with cleaning solution D 009 401 04. |
|
|
|
| – |
Pull silicone paper -3- off
sensor foil -2-. |
| The transparent protective foil -1-
remains initially on sensor foil as an assembly aid. |
|
|
|
| – |
With the aid of transparent protective foil
-1-, position sensor foil
-2- on rain and light sensor -G397--3-. |
|
|
|
| – |
Press on rain and light sensor -G397--2-
without bubbles through protective foil
-1-. |
|
|
|
| – |
Peel transparent protective film -1-
off sensor foil -2-. |
| – |
Install rain and light sensor -G397-
→ Chapter. |
|
|
|
The housings for the rain and light sensors -G397- from
various manufacturers differ.
The sensor housing with lens unit is always supplied as a
...
Other materials:
Fitting wheel, position of anti-theft wheel bolts for steel wheels
Caution
Adherence to position of anti-theft wheel bolts to
tyre valve on steel wheels is vital.
Anti-theft wheel bolts may only be fitted on ...
Rules for cleanliness
When working on the fuel supply and injection system,
observe the following “5 rules” for cleanliness:
Thoroughly clean all unions and surrounding areas before
disconnecting.
Place removed parts on a clea ...
Checking compression
Special tools and workshop equipment
required
Spark plug socket and extension -3122 B-
Compression tester -V.A.G 1763-
...
© 2016-2024 Copyright www.vwgolf.org
Repairing rain and light sensor, TRW