Volkswagen Golf Service & Repair Manual: Renewing needle bearing in crankshaft

Volkswagen Golf Service & Repair Manual / 4- cylinder injection engine(1.4 1 direct inction. turbocharger) / Enginecrankshaft group, pistons / Crankshaft / Renewing needle bearing in crankshaft

Only vehicles with a dual clutch gearbox

Special tools and workshop equipment required

Adapter Kukko -22/1-

Renewing needle bearing in crankshaft

Puller -Kukko 21/2-

Renewing needle bearing in crankshaft

Drift -VW 207 C-

Removing

–	Remove gearbox → Rep. gr.34.

–	Pull out needle bearing using commercially available puller, e.g. Kukko -21/2- and Adapter Kukko -22/1-.

Installing

Renewing needle bearing in crankshaft

–	Drive in flush with drift -VW 207 C- or centring mandrel -3176-.

–	Install gearbox → Rep. gr.34.

Renewing needle bearing in crankshaft

Crankshaft dimensions

Risk of damage to bearing pedestals when the crankshaft is removed.If the bolts of the crankshaft bearing cap are loosened, the bearing pedestals of the cylinder block will be deformed, ...

Other materials:

Removing and installing fresh air blower control unit -J126-, RHD vehicles
Removing – Remove baffle plate → Chapter. – Disconnect electrical connectors -1- and -4-. – Remove bolts ...

Removing and installing evaporator temperature sensor -G308-, RHD vehicles
Special tools and workshop equipment required Removal wedge -3409- Note Only vehicles with air conditioning system; on vehicles with heater, opening in heater ...

Safety precautions for working on vehicles with auxiliary/supplementary heater
Danger of fire and explosion from auxiliary/supplementary heater In fire and explosion-endangered areas a spark or the high temperature of the auxiliary/supplementary heater can cause a fire or an explosion. Burn injuries are also possible. – Swit ...