Volkswagen Golf Service & Repair Manual: Renewing connector on airbag
WARNING
| Observe safety instructions for pyrotechnic
components
→ Chapter. |
|
| – |
Remove driver side airbag
→ Chapter. |
| Vehicles with steering wheel without multifunction button |
WARNING
| Before handling pyrotechnic components (e.g.
separating the electrical connector), the person
handling them must ensure that he/she is “electrically
discharged”. To do this e.g. briefly touch the door
striker plate. |
|
|
|
| – |
Release connector lock -2-
using a small screwdriver -arrow-
and pull connector -1- off driver
side airbag igniter -N95-. |
|
|
|
| – |
Disconnect connectors from wiring harness
-1-. |
| – |
Detach wiring harness from retainers and remove it from
driver side airbag -2-. |
| Vehicles with steering wheel with multifunction button |
WARNING
| Before handling pyrotechnic components (e.g.
separating the electrical connector), the person
handling them must ensure that he/she is “electrically
discharged”. To do this e.g. briefly touch the door
striker plate. |
|
|
|
|
| – |
Release connector lock -2-
using a small screwdriver -arrow-
and pull connector -1- off driver
side airbag igniter -N95-. |
|
|
|
| – |
Disconnect connectors from wiring harness
-1-. |
| – |
Detach wiring harness from retainers and remove it from
driver side airbag -2-. |
WARNING
| |
Observe safety instructions for pyrotechnic
components
→ Chapter. |
| |
Before handling pyrotechnic components (e.g.
connecting the electrical connector), the person
handling them must ensure that he/she is “electrically
discharged”. To do this e.g. briefly touch the door
striker plate. |
|
|
|
|
| – |
Connect connector -1- to airbag
igniter -arrow A-. |
| – |
Press in connector lock -2--arrow B-.
Doing so, the connector will be fully inserted into airbag
igniter and locked at the same time. |
| Further installation is carried out in reverse order of
removal. Observe the following: |
 Note
| Ensure that the electrical connectors are pushed fully onto
stop and engage audibly. |
| |
→ Chapter „Assembly overview - driver side airbag“ |
|
|
|
Special tools and workshop equipment
required
Commercially available Torx screwdriver T25 of approx. 100
mm length
...
Other materials:
Service fluids and consumables
First read and observe the introductory information
and safety warnings All service fluids and consumables,
e.g. toothed belts, tyres, coolant, engine oil, spark plugs and vehicle batteries,
are being constantly developed. For this reason, service fluids and consumables
should be replaced ...
Priming plastic materials
Adhesion promoter (transparent)
Designation:
Adhesion promoter -ALO 822 000 10- (transparent)
Issued 06/2011
Product description
This transparent adhe ...
Removing tyre from wheel
Tyres which have been filled or sealed using tyre sealant
must be drained before removal.
Caution
Avoid eye and skin contact with tyre sealant.
It is a ...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing driver side airbag igniter -N95-