Volkswagen Golf Service & Repair Manual: Removing and installing voltage regulator, manufacturer: Bosch
Special tools and workshop equipment
required |
|
|
|
Offset screwdriver for slotted-head screws -VAS 6416- |
|
|
|
Torque screwdriver -V.A.G 1624- |
– |
Remove alternator -C-
→ Chapter. |
|
|
|
– |
Using offset screwdriver for slotted-head screws -VAS 6416-,
carefully lever off protective cap -1-
at fasteners -arrows-. |
|
|
|
– |
Remove bolts -arrows- for
voltage regulator -C1-. |
– |
Remove voltage regulator -C1- from alternator -C-. |
Install in the reverse order of removal, observing the
following: |
|
|
|
Component |
Specified torque |
Bolts for voltage regulator
-C1- |
2 Nm |
General description
There are different versions of decoupler pulleys with
freewheel.
Before removing the decoupler pul ...
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Removin ...
Other materials:
Important repair notes on air conditioning
Air conditioning systems designed for refrigerant R12 must
not be charged with refrigerant R134a until specific conversion
measures have been performed
→ Chapter.
The refrigerant oils specifically developed for R134a
...
O-ring
Use only O-rings that are resistant to refrigerant R134a and
related refrigerant oils. O-rings are no longer colour-coded.
Coloured and black O-rings are used.
Check that the O-rings used have the correct internal
diameters.
...
Centre armrest
Fig. 51 Front centre armrest
Fig. 52 Folding down the rear centre armrest
First read and observe the introductory information
and safety warnings Adjusting the front centre armrest
To lift, push the centre armrest up gradually in the direction of arrow
.
To lower, pull the centre ar ...
© 2016-2024 Copyright www.vwgolf.org