VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing valve, rubber valve

Ensure that the wheel rim is clean.
   
–  Insert new tyre valve with -VAS 6459--1-.
–  Unscrew and remove valve insert.
–  Inflate tyre to approx. 3 to 4 bar. The bead of the tyre must slip audibly over the hump of the rim.
–  Screw in valve insert.
–  Check tyre pressure to make sure prescribed pressure has been reached.
–  Balance wheel.
 

Removing and installing valve, rubber valve

Removing and installing valve, description of the valve
1. Valve body 1 -  Valve body 2 -  Valve core 3 -  Valve cap ...

Removing and installing valve, metal valve
Special tools and workshop equipment required     Torque wrench -V.A.G 1410- Ca ...

Other materials:

Loading the roof carrier
First read and observe the introductory information and safety warnings Loads can only be attached securely when the roof carrier system is fitted correctly  . Maximum permissible roof load The maximum permitted roof load is 75 kg. The roof load limit refers to the combined weight of t ...

Assembly overview - tyre pressure sensor, tyre pressure sensor without valve
1 -  Valve cap 2 -  Nut Separate part of → Item. Specified torque → Anchor Renew after removing 3 -  Washer Separate part of ...

Routing and securing wiring
Mark lines prior to removal to prevent them from being interchanged and to ensure that they are fitted in their original positions. This applies for fuel, hydraulic and vacuum lines as well as lines for activated charcoal filter system and electrical wir ...

© 2016-2024 Copyright www.vwgolf.org