VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing valve, metal valve

Special tools and workshop equipment required
   
Torque wrench -V.A.G 1410-
Carry out the following work:
Removing
–  Remove tyre pressure sensor → Chapter.
 

Removing and installing valve, metal valve

–  Remove nut -1- from metal valve.
–  Counterhold on metal valve (for example using 2 mm twist drill) -arrow-.
Installing
  Caution
Tighten nut for metal valve to specified torque. Retightening is impermissible, as the seal may otherwise be damaged.
 

Removing and installing valve, metal valve

–  Tighten nut -1- of metal valve.
–  Counterhold on metal valve (for example using 2 mm twist drill) -arrow-.
–  Install tyre pressure sensor → Chapter.
Specified torques
→ Chapter „Assembly overview - tyre pressure sensor, tyre pressure sensor without valve“
 

Removing and installing valve, metal valve

Removing and installing valve, rubber valve
Ensure that the wheel rim is clean.     –  Insert new tyre valve with -VAS 6459--1-. ...

Run-flat tyre system PAX
...

Other materials:

General information on transporting children in the vehicle
First read and observe the introductory information and safety warnings Legislation and legal requirements take precedence over the descriptions in this owner's manual. Various standards and regulations govern the use of child seats and methods for securing them (). For example, this cou ...

Assembly overview - luggage compartment side trim, estate
  Note The illustration shows the luggage compartment side trim on the left side. The right-hand side is similar (mirror image of left-hand side). 1 -  Luggage compartment side trim Removing and installing → Chapter ...

Removing and installing retainer for digital sound package control unit -J525-
Special tools and workshop equipment required     Torque wrench -V.A.G 1783- Removing –  Removing digital sound package control unit -J525- &# ...

© 2016-2024 Copyright www.vwgolf.org