VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing valve, description of the valve

1. Valve body
1 -  Valve body
2 -  Valve core
3 -  Valve cap
The rubber valve for tubeless tyres is designed to create an air-tight seal in the hole in the rim. The elastic material of the rubber valve body presses tightly into the hole in the rim.
In the case of valves with a threaded metal base, a rubber seal is used to seal the rim. The lateral faces of the rim hole are sealing surfaces. They must therefore be free of rust and dirt and must not be damaged.
2. Valve core
The valve insert has the most important job in the valve. It creates a seal and enables the regulation of the air pressure. The small flat seal on the valve core can only function correctly if it is free of foreign particles, dirt and moisture. The compressed air system must be free of water and oil!
3. Valve cap
A valve cap must always be screwed onto the valve. It prevents dirt from getting into the valve. Dirt which may be in the valve would reach the seal of the valve plate when the tyre is inflated and cause a leak.
The valve must be renewed every time a new tyre is fitted.
If the vehicle is driven without caps on the valves, there is the danger that dirt may get into the valve. This leads to a gradual loss of air, which in turn can lead to the destruction of the tyre.
Separation of carcass and rubber → Fig.
Wide, circumferential furrows near the bead → Fig.
Stripped tread or stripped protector → Fig.
  WARNING
The valve cap must be fitted tightly to ensure air-tight sealing.
 

Removing and installing valve, description of the valve

Removing and installing valve
...

Removing and installing valve, rubber valve
Ensure that the wheel rim is clean.     –  Insert new tyre valve with -VAS 6459--1-. ...

Other materials:

Removing and installing left temperature flap control motor -V158-, LHD vehicles
Special tools and workshop equipment required Vehicle diagnostic tester First carry out the following work: –  Switch off all electrical consumers. –  ...

Unlocking the selector lever lock manually
Fig. 214 Removing the cover of the gearshift gate Fig. 215 Unlocking the selector lever lock manually (Variant A) and (Variant B) First read and observe the introductory information and safety warningsIf the power fails in the vehicle (for example if the battery is discharged) and the ve ...

2-pack fine filler, flexible
Designation:   2-pack fine filler, flexible -LSP 787 100 A1- Issued 07.2010 Product description 2-pack fine filler, flexible -LSP 787 100 A1- is a two-pack filler with g ...

© 2016-2024 Copyright www.vwgolf.org