Volkswagen Golf Service & Repair Manual: Removing and installing USB hub -R293-
– |
Switch off ignition and all electrical consumers. |
– |
Remove ignition key, if inserted. |
– |
Remove centre console insert
→ General body repairs, interior; Rep. gr.68. |
|
|
|
– |
Press fastener on retainer for USB hub -R293--4-
in direction of arrow -A-. |
– |
Lift USB hub -R293--1- and pull
out backwards. |
– |
Release and detach connectors -2-
and -3-. |
Installation is carried out in reverse order of removal. |
|
|
|
Special tools and workshop equipment
required
Removal wedge -3409-
Removing
...
Other materials:
Checklist
Using seat belts :
Check the condition of all seat belts
regularly.
Keep the seat belts clean.
Never let any foreign bodies and liquids
get on to the seat belt, the latch plate or into the slot for the seat belt
buckle.
Do not trap or damage the seat belt and
latc ...
Checking maximum wheel lock
The maximum wheel lock is determined with the aid of the
wheel alignment computer.
–
When the values for the maximum wheel lock lie outside the
tolerances, then check following:
Are steering or suspen ...
Removing and installing centre underbody covers
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
Removing
Unclip spreader river -2- and remove
centre underbody panels.
Installing
Installation is carried out in reverse ...
© 2016-2024 Copyright www.vwgolf.org