Volkswagen Golf Service & Repair Manual: Removing and installing upper rear lid trim
Special tools and workshop equipment
required |
|
|
|
|
|
Wedges -T10383 |
– |
Detach retaining straps for rear shelf on left and right from window
frame. |
– |
Release centre window frame -2- from
mountings in rear lid and side trim panels -3-
using wedge -T10383-. |
– |
Remove centre window frame -2-. |
– |
Release side window frame -3- from
catches in rear lid and lower rear lid trim -1-
using wedge -T10383-. |
– |
Remove side window frame -3-. |
Note
-
|
Before installing, check all fasteners for damage and
renew if necessary. |
-
|
Remove any retaining clips left in mountings in rear
lid using removal tool -T40280- and fit them in window
frames for installation. |
Installation is carried out in reverse order. |
|
Special tools and workshop equipment
required
Removing
–
Fold down rear ...
Special tools and workshop equipment
required
–
Remove upper rear lid trim
→ C ...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Controls for the air conditioning system  
→ Operation via the infotainment system  
→ Controls for the heating and fresh air system  
→ Information on the air conditioning system  
↠...
Tack cloth -VAS 6177
Designation:
Tack cloth -VAS 6177-
Product description:
Tack cloth with extremely effective soft tack properties for
critical cleaning tasks. Unlike other tack cloths, this cloth
does not lea ...
Factory fitted towing attachment
If the vehicle was supplied with a factory fitted towing
attachment, everything with regards to the technical and legal
requirements has already been taken care of.
It should be noted that from the start of 1988 a
»13-pin« trailer socke ...
© 2016-2024 Copyright www.vwgolf.org