Volkswagen Golf Service & Repair Manual: Removing and installing tyre pressure sensor, tyre pressure sensor with
valve
– |
Remove tyre pressure sensor-2-
from bed of wheel rim. |
Caution
Before installing tyre pressure sensor, clean valve
hole. |
|
|
|
|
– |
Install tyre pressure sensor-2-
along with a new seal and sealing washer and push it into wheel
rim at the points marked by -arrows-. |
– |
Press tyre pressure sensor-2-
into the wheel rim at the points marked by
-arrows-. |
Screw union nut -1- onto tyre
pressure sensor from outside. |
|
|
|
– |
Press tyre pressure sensor-1-
onto bed of rim at the points marked by
-arrows- and tighten union nut to 8 Nm. |
Caution
Tighten nut only to specified torque. |
The sealing washer -2-
will be deformed slightly when tightened. |
The sealing washer may be installed only once.
Install a new sealing washer with rubber seal every time
the part is fitted. |
Further tightening of the union nut is not permitted
because the seal may be damaged, leading to leaks. |
|
→ Chapter „Assembly overview - tyre pressure sensor, tyre
pressure sensor with valve“ |
|
|
|
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410-
Ca ...
Other materials:
Paintwork system for plastic components
Issue 03.2010
This universal system allows simple and reliable painting of
all external plastic components in standard applications.
(Synthetic types: PP, EPDM, ABS, PC, PPO, PBTP, UP-GF, PA, PVC,
R-TPU, PUR). This technical data sheet i ...
Folding the backrests on the rear bench seat forwards and backwards
Fig. 95 Rear bench seat: release button
①; red marking ②
First read and observe the introductory information
and safety warnings The rear seat is split for folding. Each part of the
rear bench seat can be folded down to increase the size of the luggage compartment.
Folding the rear ...
Removing and installing track rod
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1332-
...
© 2016-2024 Copyright www.vwgolf.org