VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing turn signal

Special tools and workshop equipment required
   
Torque wrench -V.A.G 1783-
  Note
Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way.
If the event of a defective LED, the turn signal repeater needs to be renewed.
Removing
 

Removing and installing turn signal

Removing and installing turn signal

–  Remove mirror cover → General body repairs, exterior; Rep. gr.66.
–  Disconnect electrical connector -4-.
–  Remove bolts -3-.
–  If present, release retaining tab.
–  Remove turn signal -2- upwards from mirror mounting -1-.

 
Installing
Install in the reverse order of removal, observing the following:
–  Test functionality.
Specified torques
Bolts → Item.
   
Assembly overview - lights in exterior mirror
1 -  Cover for mirror Material: ABS Removing and installing → General body repairs, exterior; Rep. gr.66. 2 ...

Removing and installing entry light in exterior mirror
Special tools and workshop equipment required     Torque wrench -V.A.G 1783-   Note ...

Other materials:

Removing and installing front footwell illumination bulb -L151-/-L152-
  Note If an LED front footwell light is faulty, the entire light must be renewed. Removing –  Remove front footwell light -K268-/-K269- → Chapter.     ...

Front brakes
The type of brake system installed in the vehicle is indicated among other things by the corresponding PR number on the vehicle data sticker. The vehicle data sticker can be found in the spare wheel well and in the service schedule. ...

Overview of fitting locations - mobile online services
1 -  Radio/RNS -RX1- 2 -  Telephone microphone -R38- Installed in front section of roof console Removing and installing → Chapter 3 -  Control unit 1 for information electro ...

© 2016-2024 Copyright www.vwgolf.org