Volkswagen Golf Service & Repair Manual: Removing and installing trim for locking mechanism
| Special tools and workshop equipment
required |
|
|
|
| |
|
Removal wedge -3409- |
 Note
| The aid of a second mechanic is recommended on account of
restricted space in the area of the “trim for locking
mechanism”. |
| – |
Remove respective rear head restraint
→ Chapter. |
| – |
Using a screwdriver, detach beading strip on sides and on
top of backrest cover in area of trim from backrest. |
|
|
|
| – |
Using removal wedge -3409-, carefully push cover next to
trim -2- outwards. |
| – |
Using a light, determine position of respective locking tab
-1-. |
| – |
Using hook -T10538-, carefully bend respective locking tab
-1- outwards. |
| – |
After both locking tabs -1-
have been bent outwards, pull trim upwards
-arrow-, and remove it.
|
| Install in reverse order, but note the following: |
| – |
After the trim has been installed, the locking mechanism
must work smoothly. |
|
|
|
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331
...
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331
...
Other materials:
General repair notes
To ensure flawless and successful gearbox repairs, the
greatest care and cleanliness as well as the use of good and
proper tools are essential. Of course, the basic rules for
safety also apply during repair work.
A number of genera ...
Removing and installing front entry light -W31-/-W32-
Caution
Danger of damage to component surfaces.
When using leverage tools, mask visible areas of the
component with commercially available adhesive tape.
...
Fault in the function of the automatic gearbox
First read and observe the introductory information
and safety warnings Emergency programme
There is a fault in the system if all the displays on the instrument cluster
for the selector lever positions have a light background. The automatic gearbox
is running in an emergency programme. The ...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing rear seat backrest
Removing and installing locking mechanism for rear seat backrest