Volkswagen Golf Service & Repair Manual: Removing and installing trailer detector control unit -J345-

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Towing bracket / Removing and installing trailer detector control unit -J345-

Note

When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode → Vehicle diagnostic tester.

Removing

–	Switch off ignition and all electrical consumers.

–	If ignition key is present, disengage in position 0 (locked).

–	Remove luggage compartment side trim (left-side) → General body repairs, interior; Rep. gr.70.

–	Press retaining clips -1- together in direction of arrow -A-.

–	Remove trailer detector control unit -J345--3-.

–	Disconnect connectors -2-.

Installing

Install in the reverse order of removal, observing the following:

Note

Following installation, a new trailer detector control unit -J345- must be encoded → Anchor.

Coding trailer detector control unit

–	Connect vehicle diagnostic tester.

–	Code trailer detector control unit → Vehicle diagnostic tester.

Removing and installing trailer detector control unit -J345-

Assembly overview - towing bracket socket

1 - Trailer detector control unit -J345- Removing and installing → Chapter 2 - Retaining frame Fo ...

Blind Spot Monitor (Blind Spot Detection)

...

Other materials:

Repairs to wiring with cross sections up to 0.35 mm2
Special tools and workshop equipment required Crimping pliers, complete -VAS 1978/1 A- Head adapter 0.35 mmІ - 2.5 mmІ -VAS 1978/1-1- For repairs to ...

Releasing gas and draining front gas-filled shock absorbers, DCC shock absorbers
– Clamp gas-filled shock absorber vertically in vice. WARNING Safety goggles must be worn when drilling. – Drill a 3 mm hole -A ...

Removing and installing wiper arm
Special tools and workshop equipment required Puller -T10369- Torque wrench -V.A.G 1331- Removing ...