Volkswagen Golf Service & Repair Manual: Removing and installing tensioner for poly V-belt, vehicles with air
conditioner compressor
– |
Remove poly V-belt from tensioner
→ Chapter „Removing and installing poly V-belt, vehicles with
air conditioner compressor“. |
|
|
|
– |
Remove bolts -arrows- and
detach poly V-belt tensioner -1-. |
Installation is carried out in the reverse order; note the
following: |
– |
Install poly V-belt
→ Chapter. |
→ Chapter „Assembly overview - poly V-belt drive, vehicles with
air conditioner compressor“ |
|
|
|
Removing
–
Remove poly V-belt from tensioner
→ Chapter „Removing and installing poly V-belt, vehicles without
air co ...
Special tools and workshop equipment
required
Counterhold -T10475-
Removing
...
Other materials:
Spray can filling device -VAS 6425
Designation:
Spray can filling device -VAS 6425-
Product description
The spray can filling device is a pneumatic filling device
for filling paint spray cans with premixed base coats and top
c ...
Introduction
This chapter contains information on the following subjects:
→ Indicator lamps and fuel gauge
→ Filling the tank with petrol, diesel or E85
→ Things to note for diesel vehicles
→ Capacities
→ Checks when filling the tank
The fuel c ...
Engine preheating
Fig. 131 The front left of the bumper:
connection for engine preheating ②
First read and observe the introductory information
and safety warnings In engine preheating mode, the engine coolant is heated
slowly using a heating element while the vehicle is stationary. To do so, the cables
...
© 2016-2024 Copyright www.vwgolf.org