Volkswagen Golf Service & Repair Manual: Removing and installing spray jet, GTI, GTD and »R«
 Note
| The spray jet is installed in the high-level brake light. |
| – |
Remove high-level brake light
→ Chapter. |
|
|
|
| – |
Pull spray jet -1- together
with hose -2- in direction of arrow
-A- out of high-level brake light. |
| Install in the reverse order of removal, observing the
following: |
Note
| Make sure to push the spray jet into the mounting as far as
stop. |
|
|
|
Note
| Adjustable spray jets are only installed on Golf models. |
| – |
Adjusting rear window washer system spray jets
→ Booklet36.1. |
|
|
|
Note
The spray jet is installed in the high-level brake light.
Removing:
–
Remove high-level brake ligh ...
Other materials:
Removing and installing charge air cooler
Special tools and workshop equipment
required
Hose clamps up to 25 mm -3094-
Drip tray for workshop hoist -VAS 6208-
...
Recommended summer tyres
Recommended summer tyres, worldwide except North America and China
Notes regarding the recommended tyres
→
→ Chapter „Explanations regarding world regions“
Tyre size
Make
Tread pattern
Remarks
195/65 R& ...
Removing and installing rear door trim
Note
Removal and installation is described for the rear door trim
on driver side. Follow same instructions for the front passenger
side as appropriate.
Special tools and workshop equipment
required
...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing spray jet, Golf