Volkswagen Golf Service & Repair Manual: Removing and installing seat trim on tunnel side

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Seat frames / Front seats / Removing and installing seat trim on tunnel side

Note

Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate.

Special tools and workshop equipment required

Removal wedge -3409

Removing

–	Remove front seat → Chapter.

–	Remove spreader rivets -arrows- of trim -1-.

–	To do this, press clamping pins in spreader rivets -arrows- inwards.

–	Lever off spreader rivets -1- using removal wedge -3409-.

Removing and installing seat trim on tunnel side

–	Remove trim -1- from mountings in seat frame.

Removing and installing seat trim on tunnel side

Installing

Install in reverse order, but note the following:

–	Insert spreader rivets -arrows- and press in clamping pins.

Specified torques

→ Chapter „Assembly overview - front seat“

Removing and installing seat trim on tunnel side

Connecting and disconnecting airbag adapter

Special tools and workshop equipment required Airbag adapter -VAS 6282- ...

Removing and installing seat trim on sill side, seat of type "ergo Aktiv"

Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. ...

Other materials:

Variable luggage compartment floor
Fig. 103 In the luggage compartment: lifting the variable luggage compartment floor Fig. 104 In the luggage compartment: variable luggage compartment floor folded up First read and observe the introductory information and safety warnings The variable luggage compartment floor is height-a ...

Checking systems with a restrictor and collector (with internally regulated air conditioner compressor)
Note Connecting air conditioner service station → Chapter. Observe the test prerequisites → Chapter. – Raise engine speed to 2,000 rpm. ...

Function of air quality sensor -G238-
The air quality sensor detects noxious substances in the ambient air (primarily petrol and/or diesel fumes). The Climatronic control unit -J255- evaluates the signal from the air quality sensor -G238-. The air conditioning system i ...