Volkswagen Golf Service & Repair Manual: Removing and installing seat trim on sill side, seat of type "ergo Aktiv"
 Note
| Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate. |
| Special tools and workshop equipment
required |
|
|
|
| – |
Adjust seat to fully upright position. |
| – |
Remove backrest adjustment
→ Chapter. |
| – |
Remove handle for seat height adjustment
→ Chapter. |
|
|
|
| – |
Press in clamping pin -3-. |
| – |
Lever off spreader rivets -2- using
removal wedge -3409-. |
| – |
Open locking mechanism -arrows- on trim
-1-. |
| – |
Remove trim from bracket -5- towards
front. |
| – |
Unclip wiring harness -4- from trim
-1-. |
| – |
Release and pull off connectors on switches. |
| Installation is carried out in reverse order. |
|
Note
Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate.
...
Note
Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate.
...
Other materials:
Assembly overview - deformable element
1 -
Front deformable element
2 -
Bolt
6.0 Nm
3 -
Rear deformable element
4 -
Bolt
6.0 Nm
...
Assembly overview - dash panel
1 -
Side defroster vent
Left and right
Removing and installing
→ Chapter
2 -
Rubber buffer
Qty. 2
Slide onto dash panel mountings on lower windscreen frame
3 -
Bolt
1.5 Nm
...
Connecting vehicle diagnostic tester
Note
Observe the latest operating instructions for vehicle
diagnosis tester, which are displayed after selecting the
“Administration” and “Operating Manual” keys.
Special tools and workshop equipment
required
...
© 2016-2022 Copyright www.vwgolf.org
Removing and installing seat trim on tunnel side
Removing and installing seat trim on sill side, standard seat