|
|
Removing |
– | Loosen rear underbody panel and press downwards slightly → Chapter. |
– | Remove nuts -2-. |
– | Remove rear tunnel cross-piece -2-. |
Installing |
Install in the reverse order of removal observing the following: |
Specified torques |
Nuts → Item |
Fitting locations overview - mobile online services, eGolf
1 -
Control unit in dash panel insert -J285-
2 -
Telephone microphone -R38-
Installed in front section of roof console
Removing and installing
→ Chapter
3 -
Radio/RNS -RX ...
Removing and installing coolant pipes for auxiliary heater
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410- (4…20 Nm)
Hose clamps, up to 25 mm -3094-
...
Assembly overview - glove compartment
1 -
Glove compartment
Removing and installing
→ Chapter
2 -
Damper element
For glove compartment lid
With glove compartment light switch -E26-
Removing and installing
→ Chapter
3 -&nbs ...