Volkswagen Golf Service & Repair Manual: Removing and installing rear seat backrest
| Special tools and workshop equipment
required |
|
|
|
| |
|
Torque wrench -V.A.G 1331 |
| – |
Remove bench seat
→ Chapter. |
| – |
Remove rear right belt buckle with belt end fitting
→ Chapter. |
| – |
Pull cover -1- off centre mount
-2-. |
| – |
Separate Bowden cable for backrest release mechanism on left
and right
→ Chapter. |
| – |
Remove carrier for centre luggage compartment floor lining
→ Chapter. |
| Continued for all vehicles |
 Note
| For reasons of clarity, the left rear seat backrest (1/3) is
not shown. |
|
|
|
| – |
Equipment version with through-loading aperture: Open lid
for through-loading aperture and fold it down. |
| – |
Fold up locking bar -1- at rear
-arrow A-, detach it at front from
centre mount -arrow B- and remove
it. |
Note
| For reasons of clarity, the left rear seat backrest (1/3) is
not shown. |
|
|
|
| – |
Lift rear seat backrest -2- out
of centre mount -3- and pull it
towards centre of vehicle out of outer mountings
-1--arrows-. |
| – |
Remove rear bench seat from vehicle. |
|
|
|
| – |
Push rear seat backrest -2- in
vertical position onto outer support pin
-1-. |
| – |
Position rear seat backrest -2-
in centre mount -3-. |
| Further installation is performed in the reverse order of
removal. |
| |
→ Chapter „Assembly overview - rear seat backrest“ |
|
|
|
Removing
–
Move front seats as far forwards as possible.
–
Unclip guides -1- for ISOFIX
child seat ...
Special tools and workshop equipment
required
Removal wedge -3409-
...
Other materials:
Evacuating refrigerant circuit using air conditioner service station
Always follow the procedure described in the user's manual
for your air conditioner service station.
The procedure described here is that for air conditioner
service station -VAS 6007A-.
Before the refrigerant circ ...
Seat belt protection
Fig. 63 Driver restrained by a properly
positioned seat belt during a sudden braking manoeuvre
First read and observe the introductory information
and safety warnings Correctly fastened seat belts can make a major difference.
When fastened properly, seat belts hold the vehicle occupants in ...
Renewing trim elements, bolted trim elements
These wheels are fitted with exchangeable trim elements.
Follow these instructions during installation.
–
Clean the thread in the wheel before screwing in the new
bolts.
...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing bench seat / individual seats
Removing and installing trim for locking mechanism