VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing rear parking aid senders

Removing
Outer rear senders:
  Note
The outer rear parking aid senders can be removed and installed without the need to remove the rear bumper.
   
–  Press both locking lugs in direction of arrow -A- while at the same time pressing in sender -1- as far as stop.
–  Disconnect electrical connector -2-.
Inner rear senders:
–  Remove rear bumper cover → General body repairs, exterior; Rep. gr.63.
 

Removing and installing rear parking aid senders

–  Press both locking lugs in direction of arrow -A- while at the same time pressing in sender -1- as far as stop.
–  Disconnect electrical connector -2-.
Installing
Install in the reverse order of removal, observing the following:
  Note
When inserting the sender in the sender retainer, make sure that the isolation ring (black silicone ring) is seated correctly on the sender head.
Both locking lugs of sender retainer must audibly engage when installing the sender.
 

Removing and installing rear parking aid senders

Removing and installing front parking aid senders
Removing –  Remove radiator grille → General body repairs, exterior; Rep. gr.66. &n ...

Park assist steering
...

Other materials:

Checking radial and lateral run-out on wheel rim
–  Attach rim to wheel balancing machine. –  Use the centring system for wheel balancing machines -VAS 5271-. –  Preload tyre gauge approx. 2 mm. –  Tu ...

Fixing position of subframe, multi-link suspension, front-wheel drive, except for e-Golf and Golf GTE
Special tools and workshop equipment required     Locating pins -T10096-   Engine and gearbox jack -V.A.G 1383 A- ...

Assembly overview - front brakes PC57 and C60
  Note After every brake pad change, depress brake pedal firmly several times with vehicle stationary, so that brake pads are properly seated in their normal operating position. Use the brake filling and bleeding equip ...

© 2016-2024 Copyright www.vwgolf.org