Volkswagen Golf Service & Repair Manual: Removing and installing rear left vehicle level sender -G76-, multi-link
suspension, four-wheel drive
Special tools and workshop equipment
required |
|
|
|
Torque wrench -V.A.G 1410- |
|
|
|
– |
Disconnect connector -1-. |
– |
Remove bolts -2- and
-3-. |
– |
Take out rear left vehicle level sender -G76--4-. |
Install in reverse order of removal, observing the
following: |
Lever on vehicle level sender must face towards outside of
vehicle. |
Perform basic setting of wheel damper electronics
→ Vehicle
diagnostic tester. |
Carry out basic setting of headlights
→ Electrical system; Rep. gr.94. |
→ Chapter „Assembly overview - rear vehicle level senders,
multi-link suspension, front-wheel drive“ |
|
|
|
Special tools and workshop equipment
required
Torque wrench -V.A.G 1410-
Removin ...
Other materials:
Stone chip guard -AKR 311 KD1 10
Designation:
Stone chip guard -AKR 311 KD1 10-, black
Issue 02.2014
Product description
Stone chip guard -AKR 311 KD1 10-, black may be thinned with
water.
...
2-pack HS Vario clear coat
Designation:
2-pack HS Vario clear coat -L2K 769 K01 A5-
Issued 06.2013
Product description
2-pack HS Vario clear coat is a VOC compliant (VOC content <
420 g/l), high-gra ...
Assembly overview - engine oil cooler
1 -
Engine oil cooler
See note
→ Chapter
Removing and installing
→ Chapter
Change coolant after renewing.
2 -
Bolt
Renew
8 Nm& ...
© 2016-2024 Copyright www.vwgolf.org