Volkswagen Golf Service & Repair Manual: Removing and installing rear centre console trim
Special tools and workshop equipment
required |
|
|
|
– |
Move front seats as far forwards as possible. |
|
|
Front-end hook -3370- |
– |
Pull rear trim -1- at bottom
end to rear off centre console -2-
using front-end hook -3370-. |
– |
Pull rear trim -1- upwards off
centre console -2--arrow-. |
Note
-
Before installing, check all fasteners for damage and
renew if necessary. |
-
Installation is carried out in reverse order. |
|
|
|
Removing
–
Remove front ashtray -1-
upwards from centre console -2-.
Installing
Installat ...
Note
Removal and installation is described for the centre console
trim in footwell on driver side. Follow same instructions for
the front passenger sid ...
Other materials:
Removing and installing impact bar
Volkswagen R GmbH, optional equipment, “R Line” and “R”
Removing
–
Remove bolts -2-.
–
Lift impact bar -1- upwards
-arrows- ...
Balancing wheel, checking radial and lateral run-out of wheels and tyres
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...
Displays
First read and observe the introductory information
and safety warnings
Display
Solution
ProActive occupant protection not available
Go to a qualified workshop and have the system checked.
ProActive occupant protection: function re ...
© 2016-2024 Copyright www.vwgolf.org