Volkswagen Golf Service & Repair Manual: Removing and installing rear belt buckle
– |
Remove bench seat / single seats
→ Chapter. |
Right side: belt buckle with belt end fitting |
Note
The belt buckle with belt end fitting is part of the rear
centre seat belt. |
|
|
|
– |
Detach electrical connector -2-
for belt switch. |
– |
Remove belt buckle -3- from
belt end fitting. |
|
|
|
Left side: double belt buckle |
– |
Detach electrical connector -3-
for belt switch. |
– |
Remove double belt buckle -1-. |
Installation is carried out in reverse order. |
|
→ Chapter „Assembly overview - rear belt buckle“ |
|
|
|
Removing
–
Press belt height adjuster button and move slider of belt
height adjuster to lowest position.
–&nbs ...
Other materials:
Repairs to contact housings using cut and clamp technique
Note
For technical reasons, the contact housings for cut and
clamp technique can only be supplied with the cut and clamp
contacts inserted.
These contacts can be removed just l ...
Parking
Fig. 157 On the screen: static orientation
lines for the parking space behind the vehicle
First read and observe the introductory information
and safety warnings Overview of the orientation aid
The displayed green area ends on the road around 2 metres behind the vehicle.
Meaning of the ori ...
Vehicle diagnostic, testing and information systems
WARNING
During testing or measuring operations using a
vehicle diagnostic information system there is a risk of
serious or even fatal injury!
If the vehicle diagnost ...
© 2016-2024 Copyright www.vwgolf.org