Volkswagen Golf Service & Repair Manual: Removing and installing rear 3-point seat belt, 2-door model, without belt tensioner

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Pasanger protection / Seat belts / Removing and installing rear 3-point seat belt, 2-door model, without belt tensioner

Removing

–	Remove rear shelf support → Chapter.

–	Remove outer rear seat belt guide anchor → Chapter.

–	Remove bolt -1-.

–	Remove belt inertia reel -2- from mounting.

Installing

Install in reverse order, but note the following:

–	If parts of the belt system are removed because of an accident, the belt system bolts must be renewed.

Specified torques

→ Chapter „Assembly overview - three-point seat belt, 2-door model, without belt tensioner“

Removing and installing rear 3-point seat belt, 2-door model, without belt tensioner

Removing and installing front 3-point seat belt, 4-door model and estate

Removing WARNING Observe safety instructions for pyrotechnic components U ...

Removing and installing rear 3-point seat belt, 2-door model, with belt tensioner

Removing WARNING Observe safety instructions for pyrotechnic components U ...

Other materials:

General repair notes
Before starting work on the fuel supply system, the following steps must be performed: Before starting work, the extraction hose of a switched-on exhaust gas extraction system must be laid near to the assembly opening of the fuel t ...

Pre-bleeding brake system pressure accumulator -VX70-
Special tools and workshop equipment required Sealing plug repair kit -1H0 698 311 A- – Connect commercially available b ...

Removing and installing front body acceleration senders -G341-/-G342-
Special tools and workshop equipment required Torque wrench -V.A.G 1410- Removing – Pull seal off entire length of plenum chamber cover. ...