Volkswagen Golf Service & Repair Manual: Removing and installing radiator grille
Note
On vehicles with a flap for the charging bay in the radiator grille,
the connector must be disconnected first. |
– |
Release catches -4- using a small
screwdriver -arrow A-. |
– |
Pull radiator grille -1- in parallel
out of lock carrier catches -3- in
-direction of arrow B-. |
– |
Pull out radiator grille -1- upwards
-arrow C- from front bumper cover. |
On vehicles with a flap for the charging bay in the radiator grille,
the connector must be disconnected. |
– |
Insert radiator grille -1- into front
bumper cover -4-. |
– |
Clip radiator grille -1- into lock
carrier -3- in
-direction of arrow- by applying slight pressure. |
On vehicles with a flap for the charging bay in the radiator grille,
the connector must be connected. |
Note
Alignment to VW emblem cutout in bonnet. |
|
Bolts on radiator grille
→ Item |
1 -
Flap for charging bay
Removing and installing
2 -
Bolt
For actuator
2 Nm
Qty. 3
3 -
Actua ...
Removing
–
Removing radiator grille
→ Chapter
–
Remove bolts -2-.
...
Other materials:
Vehicle data sticker
Explanation regarding “PR numbers” on vehicle data sticker
Various types of running gear are installed depending on
engine and equipment level. These are identified by the PR
numbers.
The PR numbers are critical in d ...
Seam seals, rear body
Note
Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals.
To avoid damage or faulty operation, brush seam seals smooth
near attachments which must be attached.
...
Removing and installing Tiptronic switch in steering wheel -E439-/-E438-
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Removing
Note
Removal and installation are described for the left sid ...
© 2016-2024 Copyright www.vwgolf.org