Volkswagen Golf Service & Repair Manual: Removing and installing protective cap
| Special tools and workshop equipment
required |
|
|
|
| Thrust piece -T10502- for rear brake FNc-M38 (15”) |
|
|
|
| Thrust piece -T10146/5- for rear brake FNc-M42 (17”) |
|
|
|
| Piston resetting appliance -T 10145- |
| Only the protective cap is intended to be renewed. |
 Note
| The brake caliper does not need to be removed in order to
renew the protective cap; do not unbolt the break hose. |
| Piston has been moved back. |
| Parking brake motor has been removed. |
Risk of damage to ball screw due to removal of piston and compressor
nut.Never unscrew piston and compressor nut completely. |
|
|
| – |
Unscrew piston (-direction of arrow-)
by maximum of 20 mm (-dimension a-)
using an E11 Torx socket. |
|
|
|
| – |
Lever protective cap off brake caliper using wedge 3409
-arrows-. |
| Install in reverse order of removal, observing the
following: |
| – |
The surfaces of the piston and brake caliper must be cleaned
only with methylated spirits, and then dried. |
|
|
|
| – |
Insert protective cap into groove
-arrow- in piston. |
|
|
|
| – |
Screw piston back in (-direction of
arrow-). |
|
|
|
| – |
Push protective cap onto brake caliper using assembly tool
-T10502--2- and piston resetting
appliance -T 10145--1- in such a
way that protective cap lies against brake caliper all round its
circumference. |
|
|
|
When carrying out repairs, install all parts supplied in
repair kit.
Use only methylated spirits for cleaning the brake.
...
Other materials:
Removing and installing driver side footwell vents, RHD vehicles
Removing
Pyrotechnic components may trigger unintentionally.Risk of
injury.Discharge any static charge accumulated in your body by briefly
touching striker plate for door.
–
Remove driver side knee airbag
→ Genera ...
Valve dimensions
Note
Inlet and exhaust valves must not be reworked. Only
lapping-in is permitted.
Dimension
Inlet
valve
Exhaust
valve
Diameter a
...
Seam seals, body of hybrid vehicles
Note
Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals.
To avoid damage or faulty operation, brush seam seals smooth
near attachments which must be attached.
...
© 2016-2024 Copyright www.vwgolf.org
Assembly overview - rear brake caliper