Volkswagen Golf Service & Repair Manual: Removing and installing poly V-belt pulley with freewheel, manufacturer:
Valeo
| Special tools and workshop equipment
required |
|
|
|
| Multipoint adapter -3400- |
|
|
|
| Torque wrench -V.A.G 1332- |
|
|
|
| TORX driver bit -V.A.G 1603/1- |
| – |
Remove alternator -C-
→ Chapter. |
| – |
Clamp alternator -C- in a vice at mounting points. |
| – |
Lever off poly V-belt pulley cap. |
|
|
|
| – |
Insert adapter -3400- into poly V-belt pulley using 17 mm
ring spanner. |
| – |
Insert TORX key -V.A.G 1603/1- into alternator shaft. |
| – |
Counterhold alternator shaft whilst releasing poly V-belt
pulley by turning it anti-clockwise with ring spanner. |
| – |
Hold poly V-belt pulley stationary by hand. |
| – |
Turn alternator shaft until poly V-belt pulley can be
removed. |
| Install in the reverse order of removal, observing the
following: |
| – |
Screw poly V-belt pulley by hand onto alternator shaft as
far as stop. |
| To install poly V-belt pulley, the torque wrench -V.A.G
1332- needs to be set up as follows: |
|
|
|
| – |
Release socket drive -1- and
pull off grip -2-. |
| – |
Turn grip -2- 180° and reinsert
socket -1-. |
| – |
Set turning direction of torque wrench -V.A.G 1332- to
anti-clockwise at socket drive. |
|
|
|
| – |
Insert TORX key -V.A.G 1603/1- into alternator shaft. |
| – |
Counterhold adapter -3400- using 17 mm ring spanner. |
| – |
Tighten poly V-belt pulley by turning alternator shaft
anti-clockwise using torque wrench -V.A.G 1332-. |
|
|
|
| Component |
Specified torque |
| Securing nut for poly V-belt
pulley |
80 Nm |
Special tools and workshop equipment
required
Multipoint adapter -3400-
...
General description
There are different versions of decoupler pulleys with
freewheel.
Before removing the decoupler pul ...
Other materials:
Refrigerant line with restrictor
Observe safety precautions
→ Chapter „Safety precautions when handling refrigerants“.
–
Comply with notes
→ Chapter „Working on refrigerant circuit“.
–
Observe sa ...
Air conditioner compressor regulating valve -N280
The regulating valve is fitted to the air conditioner
compressor. It is activated by the operating and display unit
for Climatronic air conditioning system -E87- or the Climatronic
control unit -J255- The regulating valve influences the pressure
in the l ...
Introduction
This chapter contains information on the following subjects:
→ Opening or closing the windows electrically  
→ Electric windows – functions  
→ Roll-back function for the electric windows  
Additional information and warnings:
Volkswagen information system â ...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing poly V-belt pulley with freewheel, manufacturer:
Bosch
Removing and installing decoupler pulley with freewheel