Volkswagen Golf Service & Repair Manual: Removing and installing parking aid control unit -J446-, RHD vehicle
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
→ Vehicle
diagnostic tester. |
– |
Remove footwell cover on driver side
→ General body repairs, interior; Rep. gr.68. |
|
|
|
– |
Release and pull out spreader rivets
-2-. |
– |
Remove control unit -1-. |
– |
Disconnect connectors -3 and 4-. |
|
|
|
– |
To do so, press locking detent -1-,
swing retainer in -direction of arrow-
and pull off connector. |
Installation is carried out in the reverse sequence. |
|
|
|
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
...
Removing
–
Remove trim under dash panel
→ General body repairs, interior; Rep. gr.68.
...
Other materials:
Fuse table
Fig. 230 In the dash panel: fuse layout
First read and observe the introductory information
and safety warningsThe table shows the fuse locations for the items of electrical
equipment which are most relevant to the customer. The left column contains the
location, the other columns contain t ...
2-pack HS mixture surfacer
Designation:
2-pack HS mixture surfacer -LGF 810 150 A4-, white
2-pack HS mixture surfacer -LGF 810 151 A4-, black
2-pack HS mixture surfacer -LGF 810 152 A4-, red
...
Detecting leaks in refrigerant circuit
Note
Different processes are described in this workshop manual
for leak detection in the refrigerant circuit. These processes
have been tested and lead to a positive result under the
different conditions of use if the application is carrie ...
© 2016-2024 Copyright www.vwgolf.org