Volkswagen Golf Service & Repair Manual: Removing and installing mirror cover trim

Volkswagen Golf Service & Repair Manual / General body repairs, interior / Trim, noise insulation / Front door trims / Removing and installing mirror cover trim

Note

Removal and installation are described for the mirror cover trim on driver side. Follow same instructions for the front passenger side as appropriate.
Removal and installation are illustrated for 4-door vehicles. Removal and installation on 2-door vehicles are analogous.

Removing

–	Remove front door trim → Chapter.

–	Remove clips -1- for mirror cover trim -2-.

–	Pull mirror cover trim -2- towards rear off front door -arrow-.

Installing

Note

Before installing, check all fasteners for damage and renew if necessary.

Installation is carried out in reverse order.

Removing and installing mirror cover trim

Removing and installing trim panel

Note Removal and installation are described for the trim panel on driver side. Follow same instructions for the front passenger side as appropriate. ...

Removing and installing inner door handle

The inner door handle is clipped into trim panel. Note Removal and installation are described for the trim ...

Other materials:

Removing and installing coolant pipes for auxiliary heater
Special tools and workshop equipment required Torque wrench -V.A.G 1410- (4…20 Nm) Hose clamps, up to 25 mm -3094- ...

Infrared heater -VAS 6876
Designation: Infrared heater -VAS 6876- Product description: The infrared heater is used to dry putty, filler, base coat, top coat and clear coat on vertical or horizontal surfaces. ...

Removing and installing brake servo, LHD vehicles
Note If there are problems with the brake servo, first check the brake servo vacuum system → Chapter. Special tools and workshop equipment required ...