Volkswagen Golf Service & Repair Manual: Removing and installing mirror adjustment unit
|
|
Special tools and workshop equipment
required |
|
|
|
|
|
Torque wrench -V.A.G 1783- |
Note
The removal and installation sequence is only for the left
adjustment unit with motor. The right side is similar. |
– |
Remove mirror glass
→ Chapter. |
– |
Unscrew bolts -3- (qty. 3) and remove
adjustment unit -1- from mirror mounting. |
– |
Swivel adjustment unit together with motor -1-
to the side and pull off connector -2-. |
– |
Connect connector -2- to
adjustment unit -1-. |
– |
Place adjustment unit -1- on
mirror mounting and fix in place by tightening bolts
-3- (qty. 3). |
– |
Install mirror glass
→ Chapter „Removing and installing mirror glass“. |
|
Special tools and workshop equipment
required
Note
Removal and i ...
Note
Removal and installation are described only for the left mirror
cover. The right side is similar.
Removing
–&nbs ...
Other materials:
Charging container in air conditioner service station with refrigerant
Always follow the procedure described in the user's manual
for your air conditioner service station.
For every air conditioning system, a certain amount of
refrigerant is prescribed as the required charge To ensure that
the system ...
Removing tyres, run-flat tyres, ultra-high-performance tyres
Only trained personnel may perform any assembly work on
run-flat tyres and ultra-high-performance tyres.
If fitted, check tyre pressure sensor using vehicle
diagnostic tester, and renew it as necessary.
Note
...
Contact surface cleaning set -VAS 6410-
Using contact surface cleaning set -VAS 6410-
The contact surface cleaning set -VAS 6410- allows optimal
repair quality to be achieved in the area of vehicle electrics.
The tools allow performing repair work in the area of the sensor
in wiring harnesses for t ...
© 2016-2024 Copyright www.vwgolf.org