Volkswagen Golf Service & Repair Manual: Removing and installing manually operated or automatic anti-dazzle interior
mirror, with rain and light sensor -G397- and without front camera for driver
assist systems -R242-
– |
Swing interior mirror downwards by approx. 25° as far as
stop. |
– |
Pull rear cover -2- downwards
-arrow- while simultaneously
releasing catches -1- using a
screwdriver. |
– |
Detach cover from mirror base and remove it. |
|
|
|
– |
Carefully release locking lugs
-arrows- and pull front cover -1-
downwards out of guides on mirror base -2-. |
|
|
|
– |
Turn interior mirror -1-
anti-clockwise by 20° -arrow- and
remove it downwards. |
– |
If fitted, disconnect connector from interior mirror. |
Note
Before installing, check all fasteners for damage and renew
if necessary. |
Installation is carried out in reverse order. |
|
|
|
Removing
–
Turn interior mirror -2- anti-clockwise
-arrow- by 90° (1/4
turn).
–
Remove interior mirror -2- from
glued-on reta ...
Removing
–
Unclip front cover -1- from
front interior light -W1- and pull it downwards by approx. 10 mm
-arrows A-.
...
Other materials:
Overview of fitting locations - airbag crash sensors
1 -
Side airbag crash sensor, front passenger side -G180-
Location: in door
Safety precautions when handling crash sensors (pressure sensors) for
front side airbags
→ Chapter
Removing and installing
→ Chapter
2 -&n ...
Removing and installing emblem with model designation, “R-Line”
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Note
Only remove when radiator grille -3-
is removed.
Removing
...
Displays
First read and observe the introductory information
and safety warnings
Display
Solution
ProActive occupant protection not available
Go to a qualified workshop and have the system checked.
ProActive occupant protection: function re ...
© 2016-2024 Copyright www.vwgolf.org