Volkswagen Golf Service & Repair Manual: Removing and installing lumbar support adjustment
Special tools and workshop equipment
required |
|
|
|
Note
Removal and installation are described for the left
vehicle side. Follow same instructions for the right side as
appropriate. |
|
|
|
– |
Pull lumbar support adjusting lever
-1- off shaft -2- using
removing pliers -3392-. |
|
|
|
Install in reverse order, but note the following: |
– |
Ensure that teeth on lumbar adjusting lever
-1- align with shaft splines
-2-. |
– |
Pull on lever to ensure it is firmly seated. |
– |
If adjusting lever is too loose following assembly, it must
be renewed. |
|
→ Chapter „Assembly overview - front backrest“ |
|
|
|
Removing
–
If possible, move front seat to highest position to reduce
as much tension on torsion rod as possible.
...
Removing
Note
The head restraints can be renewed with front seat installed.
The ...
Other materials:
Removing and installing door opener illumination bulb -L108-/-L109-
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way (mirror image of left side).
Removing
–
Remove front ...
Changing bulbs in the tail light cluster in the body
Fig. 239 On the side of the luggage compartment:
removing the tail light cluster
Fig. 240 Tail light cluster in the body:
removing the bulb holder ① to ⑤: release tabs
First read and observe the introductory information
and safety warningsThe steps should only be carried out in the spe ...
Selection menu
First read and observe the introductory information
and safety warnings
Menu
Function
See
Driving data
Information
and settings for the multifunction display (MFD).
,
Display of current warning or information mess ...
© 2016-2024 Copyright www.vwgolf.org