Volkswagen Golf Service & Repair Manual: Removing and installing intake manifold sender -GX9-
Intake manifold sender -GX9- consists of: |
Intake air temperature sensor 2 -G299- |
Intake manifold pressure sender -G71- |
– |
Remove air filter housing
→ Chapter. |
|
|
|
– |
Disconnect electrical connector -1-. |
– |
Release fasteners -arrows-, and
remove intake manifold sender -GX9-. |
Installation is carried out in the reverse order; note the
following: |
Note
If the retaining tabs broke off during removal, the sender
can be secured using two securing bolts as per
→ Electronic Parts Catalogue. Specified torque:
→ Anchor |
|
|
|
Component |
Specified torque |
Intake manifold sender -GX9- |
3 Nm |
– |
Install air filter housing
→ Chapter. |
|
|
|
Special tools and workshop equipment
required
Assembly tool -T10118-
...
Other materials:
Introduction
This chapter contains information on the following subjects:
→ Stowing items of luggage
→ Driving with an open tailgate
→ Driving a loaded vehicle
→ Vehicle-specific weight ratings
Heavy objects must always be stowed securely in the luggage comp ...
Removing and installing trim panel
Note
Removal and installation are described for the trim panel on
driver side. Follow same instructions for the front passenger side
as appropriate.
Removal and installation are illustrated for 4-door vehicles.
...
Service and disposal of belt tensioners
First read and observe the introductory information
and safety warnings Seat belts may become damaged during any work on the
belt tensioners or while removing or refitting any vehicle parts in conjunction
with any other repair work. This damage will not always be noticeable. The consequence ...
© 2016-2024 Copyright www.vwgolf.org