VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing inner door cover

Special tools and workshop equipment required
   
  Note
Removal and installation are described only for the left cover. The right side is similar.
Removing
 

Removal wedge -3409-
Removal wedge -3409-

Removing and installing inner door cover

–  Remove rear door trim → General body repairs, interior; Rep. gr.70.
–  Lift lower end of cover -1--arrow a-.
–  Pull cover -1- frontwards out of door -arrow b-.
  Note
If required for subsequent work, pull cable -3- with grommet -2- out of cover -1-. Separate connector at grommet (if there is one).

 
Installing
   

Removing and installing inner door cover

–  Fit cable -3- together with grommet -2- into cover -1-.
–  Attach grommet -2- to cover -1-.
–  Insert cover -1- into door -2--arrow a-.
–  Engage cover -1- around circumference -arrow b-.
  Note
Check proper seating of cover by pressing with fingers around circumference.
Removing and installing window winder
Removing –  Slide spacer ring -2- in -direction of arrow a- and pull window winder off window lifter mechanism -arrow b-. Installing ...

Removing and installing striker pin
Special tools and workshop equipment required         Torque wrench -V.A.G 1331- ...

Other materials:

Checking securing parts and anchorage points after an accident
Latch plate deformed (stretched)   Height adjustment does not function.   Anchorage points (seat, pillars, underbody) distorted or thread damaged   If damage is determine ...

Removing and installing rear outer belt end fitting
Removing     –  Unscrew bolt -1- on belt end fitting -2-. Installing     The anti-rotation tab -arr ...

Assembly overview - lock carrier, NAR
1 -  Lock carrier with add-on parts Removing and installing → Chapter Moving to and back from service position → Chapter 2 -  Mounting plate Left and right 3 -  Air guide ...

© 2016-2024 Copyright www.vwgolf.org