Volkswagen Golf Service & Repair Manual: Removing and installing impact bar

Volkswagen Golf Service & Repair Manual / General body repairs, exterior / Bumper / Rear bumper / Removing and installing impact bar

Volkswagen R GmbH, optional equipment, “R Line” and “R”

Removing

Removing and installing impact bar

–	Remove bolts -2-.

–	Lift impact bar -1- upwards -arrows- out of tabs -3- in cross panel.

Installing

Removing and installing impact bar

–	Guide guides -4- of impact bar -1- from top to bottom -arrows- into tabs -3- in cross panel.

–	Tighten bolts -2-.

Specified torques

→ Chapter „Assembly overview - impact bar“

Repairing bumper cover

Note

If bumper cover is damaged, determine whether plastic can be repaired before renewing bumper.

Description under: → General Information; Body Repairs, General Body Repairs

Removing and installing bumper cover

Volkswagen R GmbH, optional equipment, “R Line” and “R” Note The removal and installation procedures f ...

Installing brackets for parking aid system

Special tools and workshop equipment required Installation tool for PDC bracket -VAS 6 ...

Other materials:

Repairs to wiring with cross sections up to 0.35 mm2
Special tools and workshop equipment required Crimping pliers, complete -VAS 1978/1 A- Head adapter 0.35 mmІ - 2.5 mmІ -VAS 1978/1-1- For repairs to ...

Wheel bolts, versions
Explanations regarding types of convex seats There are two different versions of convex tapered seats, the spherical seat and the tapered. The spherical seat is the curved surface of a s ...

Parking
Fig. 157 On the screen: static orientation lines for the parking space behind the vehicle First read and observe the introductory information and safety warnings Overview of the orientation aid The displayed green area ends on the road around 2 metres behind the vehicle. Meaning of the ori ...