Volkswagen Golf Service & Repair Manual: Removing and installing immobiliser reader coil -D2-, vehicles with keyless access locking and starting system

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Steering column switch module / Removing and installing immobiliser reader coil -D2-, vehicles with keyless access locking and starting system

Removing

–	Move steering wheel to rearmost and lowest position. Use the entire range of adjustment of the steering column for this purpose.

–	Remove lower steering column trim → General body repairs, interior; Rep. gr.68.

–	Pull reader coil -2- out of mounting -1- in direction of arrow -A-.

Installing

Install in the reverse order of removal, observing the following:

–	Press reader coil into mounting until it engages audibly.

Removing and installing immobiliser reader coil -D2-, vehicles with keyless access locking and starting system

Removing and installing intermittent wiper switch -E22-

Note The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combined to form the steering column ...

Removing and installing steering lock housing

Special tools and workshop equipment required Socket -T10424- Removing – Remove ste ...

Other materials:

Removing and installing spray jet, GTI, GTD and »R«
Note The spray jet is installed in the high-level brake light. Removing: – Remove high-level brake light → Chapter. –&nbs ...

Extraction and charging valve, low-pressure side
Note Torque wrench -V.A.G 1783- with 1/4" ratchet adapter -VAS 6234- Appropriate insert -T10364- to remove valve core → Fig. 1 - Connection with external thread and gr ...

Removing and installing onboard supply control unit -J519-, LHD vehicles
Note When renewing the control unit, select Renew function for the respective control unit in Guided fault finding or Guided functions mode → Vehicle diagnostic tester. Removing � ...