Volkswagen Golf Service & Repair Manual: Removing and installing ignition/starter switch
| – |
Remove lower steering column trim
→ General body repairs, interior; Rep. gr.68. |
|
|
|
| – |
Disconnect electrical connector -1-. |
| – |
Insert jeweller screwdrivers into recesses
-arrows- in steering lock housing
-4- to release retaining clips
-2 and 3-. |
|
|
|
| If this procedure cannot be applied due to lack of space,
make an auxiliary tool consisting of 2 wire hooks by carrying
out the steps below. |
| – |
Bend end of welding rod (1 mm in diameter) into an eye. |
| – |
Cut welding wire to length -a-. |
| Dimension -a - = approx. 50 mm. |
| – |
File end of wire hook to a point. |
|
|
|
| – |
Pull ignition/starter switch -D--5-
out of steering lock housing while ensuring that jeweller
screwdriver or wire hooks remain inserted. |
| Install in the reverse order of removal, observing the
following: |
| – |
Insert ignition/starter switch -D- into steering lock
housing until it engages audibly. |
|
|
|
Removing
–
Remove lower steering column trim
→ General body repairs, interior; Rep. gr.68.
& ...
Removing
–
Move steering wheel to rearmost and lowest position. Use the
entire range of adjustment of the steering column for this
...
© 2016-2024 Copyright www.vwgolf.org
Removing and installing ignition key withdrawal lock solenoid -N376-
Removing and installing steering column switch module, Kostal