Volkswagen Golf Service & Repair Manual: Removing and installing ignition key withdrawal lock solenoid -N376-

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Steering column switch module / Removing and installing ignition key withdrawal lock solenoid -N376-

Removing

–	Remove lower steering column trim → General body repairs, interior; Rep. gr.68.

–	Release retaining clip -arrow A-, and pull ignition key withdrawal lock solenoid -N376--2- off steering lock housing -1--arrow B-.

Installing

Installation is carried out in the reverse sequence.

Removing and installing ignition key withdrawal lock solenoid -N376-

Removing and installing lock cylinder

Special tools and workshop equipment required Locking pin -T40011- or suit ...

Removing and installing ignition/starter switch

Removing – Remove lower steering column trim → General body repairs, interior; Rep. gr.68. & ...

Other materials:

Removing and installing door lock
Special tools and workshop equipment required Torque wrench -V.A.G 1331- Socket -3410- Note Rem ...

Important notes for working with the air conditioner service station
To operate the air conditioner service station -VAS 6007A-, the following must be observed (also applies to other and latest available air conditioner service stations). → Workshop equipment The fitted f ...

Flat spots caused by storage or handling
What is a flat spot? The terms flat area and flats are also used for the term flat spot. Flat spots caused by storage or handling also cause vibration in the same way as incorrectly balanced wheels do. It is import ...