Volkswagen Golf Service & Repair Manual: Removing and installing high-level brake light, GTI, GTD and
»R«
– |
Remove roof spoiler
→ General body repairs, exterior; Rep. gr.66. |
|
|
|
– |
Unscrew bolts -1-,
-5- and -6-
from high-level brake light -7-. |
– |
Carefully lift catches -2- and
-4- to release. |
– |
Slightly lift support bracket -3-. |
– |
Remove high-level brake light -7-
from roof spoiler. |
Install in the reverse order of removal, observing the
following: |
Note
When installing high-level brake light, make sure seal is
correctly seated. The seal must not form loops or be damaged. |
– |
Check high-level brake light bulb -M25- and rear window
washer system for fault-free function. |
→ Chapter „Assembly overview – high-level brake light, GTI, GTD
and R“ |
|
|
|
Special tools and workshop equipment
required
Plastic wedge -T10039/1-
Removing: ...
Other materials:
Wheel change, wheel installation
–
Preserving wheel centring seat
→ Chapter.
1 -
When fitting the wheel, pull in all wheel bolts uniformly by
hand.
2 -
Tighten wheel bolts in diagonal sequence to ...
Assembly overview - sump and oil pump
Note
Metal shavings or a large quantity of small metal particles found
during engine repair could indicate that the crankshaft bearings or
conrod bearings are damaged. To avoid any subsequent damage, the
following work must be carried out following the repair: Caref ...
Checklist
The following actions must always be carried out in the given order
in preparation for changing the wheel :
In the event of a flat tyre, park your
vehicle on a firm and level surface at a safe distance from the flow of traffic.
Switch on the electronic parking brake
Braking, st ...
© 2016-2024 Copyright www.vwgolf.org