The removal and installation procedures may have to be modified slightly depending on engine fitted. |
Removing |
– | Removing rear exhaust system → Rep. gr.26. |
– | Loosen lock washers -2-. |
– | Remove heat shield -1-. |
Installing |
Installation is carried out in reverse order |
Checking systems with an expansion valve, receiver and air conditioner
compressor regulating valve -N280- (with externally regulated air conditioner
compressor)
Note
Connecting air conditioner service station
→ Chapter.
Observe the test prerequisites
→ Chapter.
–
Raise engine speed to 2,000 rpm.
...
Switch and sender in refrigerant circuit and related connections
Note
See vehicle-specific refrigerant circuit for switching
pressures, removing and fitting switches, together with switch
arrangement and versions.
→ Rep. gr.87
...
Routing and securing lines
Risk of damage to lines
Lines may become damaged by moving or hot components.
–
Route lines in their original positions.
–
Ensure that there is sufficient clearance to moving or hot
components.
...