Volkswagen Golf Service & Repair Manual: Removing and installing fuel tank flap release button -E319-
Special tools and workshop equipment
required |
|
|
|
Note
The removal and installation procedures are described for
LHD vehicles. Removal and installation for RHD vehicles are
similar. |
|
|
|
– |
Unclip fuel tank flap release button -E319--1-
from door trim panel using removal wedge -3409-. |
– |
Pull fuel tank flap release button -E319--1-
from door trim panel until connector becomes accessible. |
– |
Release and pull off connector, then remove fuel tank flap
release button -E319-. |
Install in the reverse order of removal, observing the
following: |
– |
Make sure that fuel tank flap release button -E319--1-
audibly engages in door trim panel. |
|
|
|
Note
The removal and installation procedures are described for
LHD vehicles. Removal and installation for RHD vehicles are
similar.
...
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Other materials:
Primary locking element
The primary locking mechanism is what fixes an individual
crimp contact in the contact housing.
If necessary, any housing catches in place (secondary
locking mechanisms) must be released or removed prior to
disengaging the contacts using ...
Introduction
This chapter contains information on the following subjects:
→ Indicator lamps and fuel gauge
→ Filling the tank with petrol, diesel or E85
→ Things to note for diesel vehicles
→ Capacities
→ Checks when filling the tank
The fuel c ...
Charging battery in maintenance mode with battery charger -VAS 5900-
Note
When a battery is being charged in the maintenance mode and
an electrical consumer draws current from the battery, the
battery charger -VAS 5900- automatically compensates the charge.
The maintenance mode can be ...
© 2016-2024 Copyright www.vwgolf.org