Volkswagen Golf Service & Repair Manual: Removing and installing fuel pressure sender -G247-

Volkswagen Golf Service & Repair Manual / 4- cylinder injection engine(1.4 1 direct inction. turbocharger) / Mixture preparation system, electronic inj., Gas / Senders and sensors / Removing and installing fuel pressure sender -G247-

Special tools and workshop equipment required

Assembly tool -T10118-

Removing and installing fuel pressure sender -G247-

Socket, 27 mm -T40218- or commercially available 27 mm hexagon socket insert

Removing

Removing and installing fuel pressure sender -G247-

–	Disconnect electrical connector -1-.

Note

Place a cloth underneath to catch escaping fuel.

–	Unscrew fuel pressure sender -G247--2- using socket, 27 mm -T40218-.

Installing

Installation is carried out in the reverse order; note the following:

Note

Do not lubricate thread of fuel pressure sender.

Specified torques

→ Chapter „Assembly overview - fuel rail with injectors“

Removing and installing fuel pressure sender -G247-

Removing and installing intake manifold sender -GX9-

Intake manifold sender -GX9- consists of: Intake air temperature sensor 2 -G299- Intake manifold pressure sender -G71- ...

Checking fuel pressure sender -G247-

Special tools and workshop equipment required Vehicle diagnostic tester Pr ...

Other materials:

Removing and installing steering column electronics control unit -J527-, Kostal
Note Airbag coil connector and return ring with slip ring -F138- is integrated in steering column electronics control unit -J527-. When renewing the control unit, select “Renew” function for the respec ...

Using a child seat on the front passenger seat
First read and observe the introductory information and safety warnings Not all countries allow you to transport children on the front passenger seat. Not every child seat is suitable for use on the front passenger seat. Volkswagen dealerships keep an up-to-date list of all authorised chil ...

Removing and installing rear window
Note The removal of a bonded window is described using the Removal kit for flush bonded windows -V.A.G 1474 A-. Alternatively, you can also use the cutting tool for bonded windows -VAS 6452-. ...