VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing front tunnel cross-piece

Special tools and workshop equipment required
   
   

Torque wrench -V.A.G 1331-
Torque wrench -V.A.G 1331-

Removing and installing front tunnel cross-piece

Removing
–  If fitted, remove centre underbody panel → Chapter
–  Remove bolts -2-.
–  Remove front tunnel cross-piece -1-.
Installing
Install in the reverse order of removal observing the following:
Specified torques
  Bolts → Item
Removing and installing rear underbody cover – e-Golf
Removing –  Remove bolts -2-. –  Unscrew nuts -3-. –  Remove underbody cover -1-. Installing ...

Removing and installing rear tunnel cross-piece
Special tools and workshop equipment required         Torque wrench -V.A.G 1331- ...

Other materials:

Removing and installing LED modules for daytime running light and side light -L176-/-L177- (“GTE” only)
Special tools and workshop equipment required     Torque wrench -V.A.G 1783-   Torque screwdriver -VAS 6494-   N ...

Removing and installing coolant pump for high-voltage battery -V590-
Special tools and workshop equipment required     Hose clamps, up to 25 mm -3094-   Hose clip pliers -VAS 6362- ...

Safety precautions when working on fuel supply system
Risk of injury due to highly-pressurised fuel. The fuel system is under high pressure. Risk of injury due to fuel which may spurt out. –  Release high pressure before opening the fuel system.       & ...

© 2016-2022 Copyright www.vwgolf.org