Volkswagen Golf Service & Repair Manual: Removing and installing front treble loudspeakers -R20-/-R22-

Volkswagen Golf Service & Repair Manual / Communication / Infotainment / Sound system / Removing and installing front treble loudspeakers -R20-/-R22-

Front left treble loudspeakers -R20-/front right treble loudspeakers -R22- are located in A-pillar trim.

Note

If the treble loudspeaker needs to be renewed, the A-pillar trim will also need renewing.

Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way.

Removing

–	Switch off ignition and all electrical consumers, and remove ignition key.

–	Remove A-pillar trim → General body repairs, interior; Rep. gr.70

Installing

Installation is carried out in reverse order of removal.

Removing and installing retainer for digital sound package control unit -J525-

Special tools and workshop equipment required Torque wrench -V.A.G 1783- Removin ...

Removing and installing rear treble loudspeakers -R14-/-R16-, 2-door

Rear left treble loudspeakers -R14-/rear right treble loudspeakers -R16- are located in rear side trim panels. Note If the trebl ...

Other materials:

Removing and installing manually operated or automatic anti-dazzle interior mirror, with rain and light sensor -G397- and without front camera for driver assist systems -R242-
Removing – Swing interior mirror downwards by approx. 25° as far as stop. – Pull rear cover -2- downwards -arrow- while simultaneously releasing catches -1- using a screwdriver. ...

Coolant hose schematic diagram
Note The arrows point in the direction of coolant flow. The arrows on the coolant pipes and on the ends of the hoses must be aligned with each other. Vehicles ►June 2013 ...

Pre-treatment of bonded surfaces when renewing laser-welded roofs
Using P180-grade sandpaper, dry-sand cathodic dip primer on bonding surface for roof → Item down to bare metal. – Using P180-grade sandpaper, dry-sand bonding surface for ...