Volkswagen Golf Service & Repair Manual: Removing and installing front parking aid senders

Volkswagen Golf Service & Repair Manual / Electrical system / Lights, lamps, switches outside / Parking aid / Removing and installing front parking aid senders

Removing

–	Remove radiator grille → General body repairs, exterior; Rep. gr.66.

Caution

Risk of damage to component.

Carefully pull off bumper. When doing this, ensure that the bumper is not being deformed or torn.

In order to avoid scratches on the surfaces when removing the headlight, mask off the surrounding areas.

–	Unscrew bolts -3- from front wheel housing liner.

–	Unscrew bolts -1- if present.

–	Release bumper -2- from wing and pull it off in direction of arrow -A-.

Removing and installing front parking aid senders

–	Press both locking lugs in direction of arrow -A- while at the same time pressing in sender -1- as far as stop.

–	Disconnect electrical connector -2-.

Installing

Install in the reverse order of removal, observing the following:

Note

When inserting the sender in the sender retainer, make sure that the isolation ring (black silicone ring) is seated correctly on the sender head.

Both locking lugs of sender retainer must audibly engage when installing the sender.

Removing and installing front parking aid senders

Removing and installing rear parking aid warning buzzer -H15-

Removing – Remove C-pillar trim → General body repairs, interior; Rep. gr.70. ...

Removing and installing rear parking aid senders

Removing Outer rear senders: Note The outer rear parking aid senders can be removed and installed without the n ...

Other materials:

Cleaning and changing windscreen wiper blades
Fig. 198 Changing the windscreen wiper blades Fig. 199 Changing the rear window wiper blade First read and observe the introductory information and safety warnings The factory-fitted windscreen wiper blades are coated with graphite. The graphite coating ensures that the windscreen wipe ...

Assembly overview - speed sensor on rear axle, all-wheel drive
1 - ABS speed sensor Clean inside surface of hole before inserting sensor Coat inside surface with high-temperature paste -G 052 112 A3- Removing and installing → Chapter 2 - Bolt ...

Stone chip tester -VAS 5102A
Designation: Stone chip tester -VAS 5102A- Product description The stone chip tester -VAS 5102A- has been developed by VW AG and allows the user to recognise whether paint damage is the resul ...