VW Golf manuals

Volkswagen Golf Service & Repair Manual: Removing and installing front air distribution flap actuation unit, Climatronic, RHD vehicles

Volkswagen Golf Service & Repair Manual / Heating, air conditioning / Air conditioner / Control motors / Removing and installing front air distribution flap actuation unit, Climatronic, RHD vehicles

Removing
–  Remove dash panel central tube → General body repairs, interior; Rep. gr.70.
–  Remove air duct for defroster vent → Chapter.
–  Unbolt air distribution flap control motor → Chapter.
   
–  Carefully press off actuating lever -5--arrow-.
–  Unscrew bolts -1-, -2- and -6-.
–  Remove actuation unit -7- upwards.
Installing
–  Installation is carried out in the reverse order. When installing, note the following:
  Note
Check operation of flaps and hinge mechanism before fitting.
Make sure levers and shafts are properly fitted in the mounts.
  Removing and installing front air distribution flap actuation unit, Climatronic, RHD vehicles
–  Check that the two gear wheels are correctly aligned.
The rectangular tooth -2- must engage in the gap -3- of the gear wheel -1-.
 

Removing and installing front air distribution flap actuation unit, Climatronic, RHD vehicles

–  When fitting actuation unit, actuating lever -3- must engage in lever -4- of centre vent flap.
Specified torque
→ Chapter „Assembly overview - heater and air conditioning unit“
Assembly overview - dash panel central tube → General body repairs, interior; Rep. gr.70.
 

Removing and installing front air distribution flap actuation unit, Climatronic, RHD vehicles

Removing and installing front air distribution flap actuation unit, Climatronic
Removing –  Remove dash panel → General body repairs, interior; Rep. gr.70. –  Remov ...

Front heater and air conditioning unit
...

Other materials:

Air conditioner service and recycling equipment
At present, various manufacturers offer air conditioner service devices on the market for evacuating, cleaning and charging refrigerant in vehicle air conditioning systems.     ...

Removing and installing inlet camshaft oil seal, pulley end, engine codes CPTA, CHPA, CZEA, CZDA
Special tools and workshop equipment required     Assembly tool -T10478 B- Removing –  Detach toothed belt from camshafts → Chapter ...

Anti-corrosion wax
Designation: Anti-corrosion wax -AKR 321 M15 4- Anti-corrosion wax -AKR 321 M16 10- Issued 04.2009 Product description Anti-corrosion wax -AKR 321 M15 ...

© 2016-2024 Copyright www.vwgolf.org